857061 782 mhz notch filter preliminary data sheet: rev d 01/18/2012 - 1 of 6 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network applications ? b13 notch filter for svlte applications ? applicable passbands: 836.5 mhz cell band, 881.5 mh z cell band, 751 mhz b13 lte. ? handsets product features functional block diagram top view ? high linear notch filter ? usable reject band 10 mhz ? low loss in 824-849 mhz/869-894 mhz and 746-756 mhz ? high b13 attenuation ? ceramic chip-scale package (csp) ? small size: 2.5 x 2.00 x 0.56 mm ? hermetic rohs compliant, pb -free general description pin configuration the 857061 is a high performance surface acoustic wave (saw) notch filter designed to reject emissions in the b13 band while passing band 5 cell band. 857061 is specifically designed to enable simultaneous voice and lte for band 5 application. it is specified to support band 5 requirements in the entire 824 - 894 mhz band. the 857061 uses advanced packaging techniques to achieve an industry-leading 2.5 x 2.0 x 0.56 mm package. the filter exhibits excellent power handling capabilities. pin # se - balanced description 3 input 9 output 1,2,4,5,7,8,10,11 ground 6,12,13 case ground ordering information part no. description 857061 packaged part 857061-evb evaluation board standard t/r size = 10,000 units/reel. input 1 2 3 4 5 11 10 9 8 7 12 13 6 output gnd gnd gndgnd gnd gnd gnd gnd gnd gnd gnd
857061 782 mhz notch filter preliminary data sheet: rev d 01/18/2012 - 2 of 6 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network specifications electrical specifications (1) specified temperature range: (2) -30 to +85 oc parameter (3) conditions min typical (4) max units center frequency - 782 - mhz maximum insertion loss 746 ? 756 mhz 824 ? 849 mhz 869? 894 mhz - - - 1.0 0.6 0.6 1.5 1.0 1.0 db db db amplitude variation (6) 746 ? 756 mhz 824 ? 849 mhz 869? 894 mhz - - - 0.25 0.1 0.1 0.5 0.2 0.2 db p-p db p-p db p-p absolute attenuation 777 ? 787 mhz 1564 ? 1574 mhz 1574 ? 1577 mhz 2331 ? 2361 mhz 2400 ? 2484 mhz 20 3 3 5 5 24 4 4 7 7 - - - - - db db db db db input /output return loss 746 ? 756 mhz 824 ? 849 mhz 869? 894 mhz 10 13 13 14 18 18 - - db db imd3 product (5) - -105 dbm source impedance (single-ended) (5) - 50 - load impedance (single-ended) (5) - 50 - notes : 1. all specifications are based on the triquint schema tic for the main reference design shown on page 3 2. in production, devices will be tested at room tempe rature to a guardbanded specification to ensure ele ctrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature drif t and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. all power levels are referenced to the antenna port . two cw tones are applied at frequencies f1 and f2 , and the resultant intermodulation product in the 746 -756 mhz band is measured. the first tone (f1 = 824 -832 mhz, 24 dbm referenced to the antenna port) is applied at the output port (duplexer). the second tone (f2 =f1-45 mhz, 1 3 dbm referenced to the antenna port) is applied at the input port (antenna). the intermodulation product is measured at f1+45 mhz 6. over a sliding 1.25 mhz window, in-band absolute maximum ratings (7) parameter rating operating temperature -30 to +85 o c storage temperature -40 to +85 o c input power ( 8 ) +29 dbm 7. operation of this device outside the parameter rang es given above may cause permanent damage. 8. all ports matched to 50 ohms. (55 o c, equivalent 5000 hours).
857061 782 mhz notch filter preliminary data sheet: rev d 01/18/2012 ? 2011 triquint semiconductor, inc. reference design 50 ? se in schematic input single-ended front end antenna notes: actual matching values may vary due to pcb layout a nd parasitic pc board notes: top, middle & bottom layers: 1 oz copper substrates: fr4 dielectric, .031? thick finish plating: nickel: 3-8m thick, gold: .03- .2m thick hole plating: copper min .0008m thick bill of material reference des g. value description l1 13 nh coil wire l2 15 nh coil wire l3 5.6 nh coil wire sma n/a sma connector pcb n/a 3- layer 50 ? - 3 of 6 - disclaimer: subject to change without notice connecting the digital world to the se in , 50 ? se out actual matching values may vary due to pcb layout a nd parasitic mounting configuration .2m thick notes: 1. top view of the product. 2. all dimensions are in millimeters. 3. this footprint represents a recommendation only. description manufacturer part number coil wire -wound, 0402, y% murata lqw15an coil wire -wound, 0402, y% murata lqw15an coil wire -wound, 0402, y% murata lqw15an sma connector radiall usa inc. 9602 layer multiple 960 2.35 1.85 0.40 0.19x45 chamf. 0.31 1.33 1 2 3 4 11 10 9 8 12 13 1,2,4,5,6,7,8 10,11,12,13 13nh 3 9 50 ? l3 l2 15nh 5.6nh l1 disclaimer: subject to change without notice connecting the digital world to the global network output single-ended mounting configuration this footprint represents a recommendation only. part number lqw15an 13nh00 lqw15an 15nh00 lqw15an 5n6b00 9602 -1111-018 960 930 0.20 0.55 5 76
857061 782 mhz notch filter preliminary data sheet: rev d 01/18/2012 - 4 of 6 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network typical performance (at room temperature)
857061 782 mhz notch filter preliminary data sheet: rev d 01/18/2012 - 5 of 6 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network mechanical information package information, dimensions and marking package style: csp-10gt dimensions: 2.5 x 2.00 x 0.56 mm body: al 2 o 3 ceramic lid: kovar or alloy 42, au over ni plated terminations: au plating 0.5 - 1.0 m, over a 2-6 m ni plating all dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length an d width 0.10mm the date code consists of: ww = 2 digit week, y = last digit of year, m = manufacturing site code tape and reel information standard t/r size = 10,000 units/reel. all dimensio ns are in millimeters direction of travel id dot 2.0 ?13.0 ?20.2 ?102 ?330 8.8 2.7 1.75 3.5 8.0 a a 2.0 4.0 4.0 ?1.0 ?1.5 2.75 1.1 0.3 section a-a 2.23 marking code mfg site *gy m w w y id dot date code
857061 782 mhz notch filter preliminary data sheet: rev d 01/18/2012 - 6 of 6 - disclaimer: subject to change without notice ? 2011 triquint semiconductor, inc. connecting the digital world to the global network product compliance information esd information esd rating: 0 value: passes 150 v min. test: human body model (hbm) standard: jedec standard jesd22-a114 esd rating: m1 value: passes 100 v min. test: machine model (mm) standard: jedec standard jesd22-a115 solderability compatible with the latest version of j-std-020, le ad free solder, 260c refer to soldering profile for recommended guidelines. this part is compliant with eu 2002/95/ec rohs directive (restrictions on the use of certain hazar dous substances in electrical and electronic equipment). this product also has the following attributes: ? halogen free (chlorine, bromine) ? antimony free ? tbbp-a (c 15 h 12 br 4 0 2 ) free ? pfos free ? svhc free msl rating devices are hermetic, therefore msl is not applicab le contact information for the latest specifications, additional product i nformation, worldwide sales and distribution locati ons, and information about triquint: web: www.triquint.com tel: +1.407.886.8860 email: info-sales@tqs.com fax: +1.407.886.7061 for technical questions and application information : email: fl.product.engineering@tqs.com important notice the information contained herein is believed to be reliable. triquint makes no warranties regarding t he information contain herein. triquint assumes no responsibility or liab ility whatsoever for any of the information contain ed herein. triquint assumes no responsibility or liability whatsoever f or the use of the information contained herein. th e information contained herein is provided "as is, where is" and with all f aults, and the entire risk associated with such inf ormation is entirely with the user. all information contained herein is subj ect to change without notice. customers should obt ain and verify the latest relevant information before placing orders for triq uint products. the information contained herein or any use of such information does not grant, explicitly or implicitl y, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information its elf or anything described by such information. triquint products are not warranted or authorized f or use as critical components in medical, life-savi ng, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe perso nal injury or death. caution! esd-sensitive device
|
